A New Method for Sample Preparation to Accelerate Mass Spectrometric Analysis

Mass spectrometry is a widely used protein analysis method, but its sample preparation process is complex and time-consuming. Researchers at Ewon University in Japan have recently developed a new method to significantly shorten the preparation time by anion exchange solid phase extraction centrifugal columns.

The findings were recently published in Chemical Communications. The benefit of the new method is that it does not require highly specialized operating techniques to perform mass spectrometry analysis of trace amounts of cell and tissue samples with good reproducibility.

In recent years, with the popularity of proteomics research, researchers have used mass spectrometry to analyze protein components in biological samples. When detecting proteins, it is often necessary to extract protein components from cells and digest them with proteases to peptides suitable for mass spectrometry analysis. Digestion of proteins in this manner often takes 20 hours or more.

In addition, sodium dodecyl sulfate (SDS) is a surfactant commonly used in protein extraction processes. It interferes with mass spectrometry and protein digestion and must therefore be completely removed before analysis. However, removal of the SDS is at the cost of sample loss.

To overcome these challenges, researchers at Ewon University have developed a novel sample preparation method, AnExSP. It uses a microliter-sized spin column and an anion-exchange solid-phase extraction membrane installed in a pipette tip called a StageTip as a tool for protein digestion.

The researchers stated that by enriching the protein components on the surface of the diaphragm, they successfully completed the enzymatic digestion process within 60 minutes. At the same time, they established optimal conditions to elute digested peptides from the diaphragm alone, while retaining the SDS contained in the sample on the diaphragm, thereby minimizing sample loss.

They combined AnExSP with data-independent acquisition (DIA) of the Orbitrap mass spectrometer to successfully detect approximately 7,000 different protein components from 1 μg of cultured cell protein extracts. ” Using small volumes of StageTip to establish sample pretreatment conditions, AnExSP pretreatment can be used in single-cell proteomics research in the future, and the field has received increasing attention in recent years,” they said.

In addition, the AnExSP method can also be used for protein pretreatment in SDS-PAGE electrophoresis experiments. Compared with traditional pretreatment methods, AnExSP performs excellently, especially in detecting long-chain digested peptides. The researchers successfully achieved the purification of the target protein complex as well as the efficient detection of long-chain cross-linked peptides, which are difficult to detect with conventional methods.

Whats Special about Craft Beers?

Craft beer is generally known as boutique beer and these beer styles are becoming increasingly popular as people are opting for fresher alternatives to the commercial beer that is produced every year in the major breweries. Craft beers are produced in a micro brewery by a craft brewer that has a limited production rate of beer. These breweries are known for their uniqueness and innovation. Fro, oysters to fruit, craft brewers are experimenting with a range of ingredients beyond hops malt water and yeast.

Australia has recorded a sudden surge of microbreweries, and while beer consumption has reduced slightly overall, the craft beer market has grown steadily in the last five to ten years.

Craft beers are commonly found in pubs and restaurants and are gradually taking market share from the different kinds of commercial beers. This is because of the better quality of the beer which people are willing to afford. The difference between craft and commercial beer is that commercial beers are generally “made for the masses” with a taste and aroma that is virtually non-existent. Craft beers are usually well marketed with beers telling a story and a flash label and more information about the ingredients and style of the beer for those interesting in learning more about beer and brewing. This increases the appeal of the beer to the modern consumer.

A lot of people have opted for home brewing as it gives them a source to obtain better quality beers. Home brew kits make it easy to brew beers similar to your favorite boutique beers, or for experimentation. The benefit of home brewing is that it gives you complete regulation on how the beer is fermented and brewed. This also helps you control the flavors and other important factors.

Brewing craft beer is sometimes considered labor intensive, but eventually moving from bottling to kegging as your skills improve will save hours of bottle washing – the main time consuming part of brewing extract home brew recipes. For those who are yet to take the plunge from commercial to craft beer, prepare to open a whole new world of flavor. You can just visit a pub and check out some variants of craft beers that they have. You may even purchase a selection of beers from different styles and see which you prefer. The different kinds of craft beers you’ll discover are sure to impress compared to commercial beers.

What is M – Triangel Z One Laser Machine? And How to use it?

M Triangel Z one laser machine is a high technology Machine for removing and engraving the Back Cover Glass. It is a Computerized and automatic laser Machine.

In general, every laser machine performs the same function. Older models may require less speed and more manual work although the concept is generally the same. Many are heavy due to being compact and easy to use. As technology continues to improve, laser manufacturers are beginning to incorporate better, simpler, more user-friendly, and less manual work that makes the product better and faster to use. This product has a powerful laser and is much more compact than its predecessor and has optical and auto-focus which helps to speed up and simplify the process of using the machine.

This Laser Machine Has Auto-Focus functionality along with manual calibration. The laser is etching a design of a certain height from the vector file, that is where the laser does not know how far the object is away in which auto-focus automatically decides based on the vector file of the height and the physical product that is being lasered. You would 1st put the housing in the base, hit the Auto-Focus functional which basically is the auto-calibration of the product distance. If the light turns green, it has been auto focused. If the light does not need green, then you may need to do a manual adjustment (Rise / Down Button Next to Auto-Focus Button) until it turns green. After it turns green, the adjustment is ready to use.

The MT Z-One is a simple portable laser device with optical adjustment. This laser machine powers the 20W laser into a compact design and is best for removing back glass, etching or engraving devices for your customers. This machine has 110V consumption

The laser marking machine adopts a high-performance digital galvanometer scanning system, which is fast, high-precision and can operate for a long time. It can be used in most metallic materials and some non-metallic materials such as silicone, rubber, epoxy, ceramics, marble, etc. or to write permanent anti-counterfeit marks that are difficult to replicate.

We suggest a few tools and accessories that are needed. Fume Extractor is highly recommended in this because it helps with making sure the smoke that burns from the laser is vacuumed through and not inhaled by you or your technician. Other products like Gloves, Scrapping Tools, Adhesives & Glues are products that are needed however some may have different set of tools that they prefer versus another tool.

Features

Visual Focus
Double Power
Foldable Design
Portable

Specification

Voltage: 110-220V 50-60HZ

Power: 120W

Laser power: optional maximum 20W

Laser wavelength: 1064nm

Maximum marking range: 175X175mm

Equipment size (standing): 300*524*418 (MM)

Equipment size (folded): 525*550*136 (MM)

Carton size: 635*410*290 (MM)

Product net weight: 15kg

Product gross weight: 16.7kg

Support weight: 4.9kg

When purchasing the Z- One Laser Machine from Mobilesentrix you receive the following:

Warranty 30 Day

if you are not satisfied or not what you expected, simply request for a Return Label (We ask that you keep the original product packaging for warranty purposes) and we will get you refunded back.

Warranty 60 Day Repair

If you are experiencing technical issues with the product within the 60-day warranty period, you can still ship the product back to us, and we can fix or repair it for you. If it is something we cannot fix or repair, we will exchange the machine for you as well. This does not apply to any physical damaged part.

Warranty 180 Day Support

If there is a technical issue with the machine within 180 days of purchase that requires it to be repaired, we’ll provide you with a shipping label to ship the device to us, and we’ll repair it for you for labor or parts costs associated with this.

How to use Z – One Laser Machine?

First of all, Windows PC is required to be used for this Laser Machine and Mac are not compatible. Download Software from http://imt.sjtmt.com

Once the software is installed, draw the square box on a blank sheet on the application then lay the black paper provided on the base and burn it in using F2 function. Afterwards, press the F1 Key to see if the red light aligned exactly on the burn area location. If the red light is misaligned, press the F3 key to adjust the settings. In the second tab, called the red light. Adjust the X & Y axis to your machine’s calibration.

once you plug in the machine and download the software, the software will know which machine you are connecting to and then allow you to download and update your templates.